Mode Overview
●
Calendar Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands show
another time (Dual Time).
30
④⑤ ⑥
③
②①
Last Time
Adjustment Result
Hand Shift
A Current location time (24-hour time)
One revolution every 24 hours.
B Day of the week at current location
C Dual Time hour
D Dual Time minute
E Dual Time hour (24-hour hand)
The hand points to the A-side for a.m.
times, and to the P-side for p.m. times.
F Current location date
Time Adjustment Using a Time Calibration
Signal
Hold down (D) for at least 0.5 seconds until the
second hand points to [RC].
●
A manual time calibration signal receive
operation cannot be performed while the
watch is paired with a phone.
Swapping the Current Location Time and
Dual Time
Hold down (B) for at least three seconds.
Connecting with a Paired Phone to Adjust
the Watch’s Time
Hold down (D) for at least 0.5 seconds until the
second hand points to [C].
Searching for a Paired Phone
Hold down (D) for at least five seconds.
●
Stopwatch Mode
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
●
The main hour and minute hands indicate
the current time.
A Stopwatch seconds
B Stopwatch hours
C Stopwatch minutes
D Stopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
●
Timer Mode
The second hand, and the small hour and
minute hands indicate the current countdown
time.
●
The main hour and minute hands indicate
the current time.
A Timer seconds
B Timer hours
C Timer minutes
D Timer hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
●
Alarm Mode
The small hour and minute hands indicate the
alarm time.
The second hand indicates the alarm enabled/
disabled setting.
●
The main hour and minute hands indicate
the current time.
30
①
②③④
Hand Shift
Enabling/
Disabling the
Alarm
A Alarm enabled/disabled
B Alarm hour
C Alarm minute
D Alarm hour (24-hour time)
The hand points to the A-side for a.m.
times, and to the P-side for p.m. times.
Using the Crown
The watch’s crown is a screw-in (screw lock)
type. To use the crown, you first need to rotate
it towards you (leftwards) to loosen it.
Important!
●
To prevent loss of water resistance
and/or damage due to impact, be sure
to screw the crown in by rotating it
away from you as you push it in.
●
When pushing the crown back in, take
care not to apply too much force.
Watch Operation Guide 5636
3
To Next Page
Loading...
Need help?
General
