Casio CTK-1100 User Manual

E-15
Basic Operations
This section provides information on performing basic
keyboard operations.
Playing the Keyboard
To play the keyboard
1 Set the POWER/MODE switch to NORMAL.
2 Use the MAIN VOLUME slider to lower the
keyboard volume.
• It’s always a good idea to set the keyboard volume at
a relatively low level before playing.
3 Play something on the keyboard.
Selecting a Tone
This keyboard comes with 100 built-in tones. Use the
following procedure to select the tone you want to use.
To select a tone
1 Find the tone you want to use in the TONE List and
note its tone number.
• Not all of the available tones are shown on the tone
list printed on the keyboard console. For a complete
list, see the “Tone List” on page A-1.
2 Press the TONE button.
3 Use the number buttons to input the two digit tone
number for the tone you want to select.
Example: To select “26”, input 2 and then 6 .
NOTE
• Always input both digits for the tone number, including
a leading zero (if any). If you input one digit and stop,
the display will automatically clear your input after a few
seconds.
• You can also increment the displayed tone number by
pressing [+] and decrement it by pressing [–].
POWER/MODE
MAIN VOLUME
TONE
Number buttons
Appears when TONE button is pressed
CTK1100_e_08-16.p65 10.3.9, 5:14 PM15

Casio CTK-1100 Specifications

General

MIDI-keyboard number of keys	61 keys
Product color	Black
Pitch bend wheel	Yes
Interface	-
Dimensions (WxDxH)	949 x 304 x 93 mm
Power consumption (typical)	7.7 W

Weight and Dimensions

Weight	3300 g