E-31
Deleting the Contents of a Specific
Track
Use the following procedure to delete all of the data currently re-
corded in a specific track.
To delete all of the data in a specific track
1. Use the MEMORY button to enter record standby, and
then use [+] and [–] to select the song (0 or 1) whose
track you want to delete.
2. Hold down the MEMORY button until the track de-
lete screen appears on the display.
3. Use the LEFT/TRACK 1 or RIGHT/TRACK 2 button to
select the track whose data you want to delete.
Example: To select Track 1
4. Press the [+] button.
• This deletes the selected track and enters memory playback
standby.
❚
NOTES
❚
• The track delete screen is cleared from the display automatically if you
leave the keyboard with the track delete message on the display for
about five seconds without doing anything.
• Once you select a track in step 3, you cannot change to a different track
without quitting the track delete operation and starting again.
• You cannot select a track for deletion if that track does not contain any
data.
• Pressing the MEMORY button while the track delete screen is on the
display returns to record standby.
ETUDE
CONCERT
PIECE
LAYER
SPLIT
GM
TOUCH
RESPONSE
MEMORY
Flash
702A-E-033A
To Next Page
Loading...
Need help?
General
