60
OTHER RECORDING FUNCTIONS
2.
While watching the
image on the monitor
screen, use [왗] and
[왘] to focus.
• Pressing [왗] or [왘] causes the area inside of the
boundary displayed in step 1 to fill the monitor
screen momentarily to aid in focus. The normal
image reappears a short while later.
3.
Press the shutter release button to record the
image.
IMPORTANT!
• In the Manual Focus mode, the [왗] and [왘] keys
adjust focus, even if you used key customization to
assign other functions to them (page 77).
To do this:
Focus out on the subject
Focus in on the subject
Do this:
Press [왗].
Press [왘].
Manual focus position
Using Focus Lock
Focus lock is a technique you can use to focus on a subject
that is not located within the focus frame when you record
an image. You can use focus lock in the Auto Focus mode
and the Macro mode ( ).
1.
Using the monitor
screen, compose the
image so the main
subject is within the
focus frame, and then
press the shutter
release button half
way.
• You can tell whether the image is focused by
observing the focus frame and the green operation
lamp. The indications of the focus frame and green
operation lamp are the same as those in the Auto
Focus mode.
1200
1600
NORMAL
99
03
/12
/24
12
:
58
IN
1 / 1000
F2.6
Focus frame
To Next Page
Loading...
Need help?
General
