13-2
*
1
With the fx-9860GII SD, fx-9860GII, fx-9860G AU PLUS, and fx-9860G Slim (OS 2.00),
use the Program-Link Software and USB cable that comes with the calculator.
For the fx-9750GII and fx-7400GII, you will need to purchase the separately available
FA-124.
3. Performing a Data Communication Operation
From the Main Menu, enter the LINK mode. The following data communication main menu
appears on the display.
•{TRAN} ... {displays the data send screen}
•{RECV} ... {displays the data receive screen}
•{CABL} ... {displays the cable type selection screen}
(not included on the fx-7400G
II)
•{WAKE} ... {displays the wakeup setting screen}
•{CAPT} ... {displays the screen image send setting screen}
Communication parameters are fixed at the following settings.
• 3-pin serial port
• Speed (BPS): 9600 bps max. (Connected with CFX-9850G series or fx-7400G series
calculator)
115200 bps max. (Connected with another fx-9860G
II SD, fx-9860GII,
fx-9860G AU PLUS, fx-9750GII, fx-7400GII, fx-9860G Slim (OS 2.00/1.11),
fx-9860G SD (OS 2.00/1.05), fx-9860G (OS 2.00/1.05) or fx-9860G AU (OS
2.00/1.05) calculator)
• Parity (PARITY): NONE
• USB port*
• Communication speed is in accordance with USB standards.
* The fx-7400G
II is not equipped with a USB port.
I Select Connection Mode Screen (All models except fx-7400GII)
Connecting the USB cable to the calculator will cause the dialog box shown nearby to appear.
You can use this dialog box to select the USB cable Connection Mode (screen image send
mode).
• (DataTrans) ... {mode selection for data transfer with PC}
• (ScreenCapt) ... {mode selection for sending calculator screen captures to PC using FA-
124 Screen Capture function}
• (Projector) ... {mode selection for calculator screen output to a CASIO OHP unit or CASIO
projector}
To Next Page
Loading...
Need help?
General
