6. Select the add-in that you want to install.
• If you are installing an add-in from the CD-ROM (Physium, Geometry, etc.), navigate to the
CD-ROM that is in your computer’s CD-ROM drive and then select the add-in.
7 . Click [Open].
• This should cause the imported add-in fi le to appear in the Computer window.
* If the “Memory Full Error” occurs, delete fi les in the Computer window that you no longer
need. Next, right-click “Default” and then select “Optimization” from the shortcut menu that
appears. After that, restart the procedure from step 3.
8 . On the calculator, enter the LINK Mode, and confi gure the
following settings: Cable Type: USB; Wakeup: On;
Capture: Memory.
9. Use the USB cable to connect the calculator to your computer and then click the icon.
• This will establish a connection between the calculator and FA-124 PROGRAM-LINK, and
display the contents of calculator memory in the fx-9860 window.
E-3
To Next Page
Loading...
Need help?
General
