Casio G-Shock 5657 User Manual

●
Swapping Your World Time and Home
Time
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the mode hand moves to
e
.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Note
●
Auto time adjustment does not work for
24 hours after swapping of the Home
Time and World Time.
Adjusting Hand Alignment
If the hands are out of alignment even though
auto time adjustment is being performed, use
G-SHOCK Connected to adjust them.
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the mode hand moves to
e
.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
3.
Y
Perform the operation shown on the
phone screen to correct hand alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
DisconnectedConnected
2.
X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least one second to enter the
Timekeeping Mode.
3.
X
Hold down (D) for at least three
seconds. Release the button when [FIND]
starts to flash at low speed.
The phone will sound a tone when it
establishes a connection with the watch.
●
It will take a few seconds before the
phone tone sounds.
Searching for the
phone
Preparing to search
for the phone
4.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Configuring Watch Settings
Alarm time, timer start time, and other settings
can also be configured using G-SHOCK
Connected.
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the mode hand moves to
e
.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Watch Operation Guide 5657
12

Casio G-Shock 5657 Specifications

General

Brand	Casio
Model	G-Shock 5657
Category	Watch
Language	English