EN-17
5. Using the Emulator Key-Log
This section explains how to use the Key-Log, which is a log of the emulator’s key operations. It
also covers playback of recorded key operations and editing of Key-Log records.
All of the operations in this section are performed using toolbar buttons.
k Key-Log File Structure
A Key-Log file can contain multiple Key-Log records.
Key-Log records contain recorded key operations and text.
The following shows the Key-Log file structure.
Mathematics
Key-Log File
Key-Log Records
Key
Text Data
b
w
• You can assign names (up to 20 single-byte characters) to Key-Log records.
Important!
• Key-Log data processing can take a long time when there is a lot of data. This is normal and does
not indicate malfunction.
• Only key operation procedures are stored in a Key-Log file. Because of this, replaying Key-Log
contents starting from an initial screen that is different from the one that was displayed when the
data was originally stored may produce different results.
• A key operation may not be stored to a Key-Log if you click it while an emulator calculation
operation is in progress.
To Next Page
Loading...
Need help?
General
