Casio PF-8000 User Manual

•
(4) BUZZER command
• This command turns the key sound on or off.
Each time & key is pressed, the mode changes to BUZZER ON or OFF alternately.
• After All Reset button is pressed, BUZZER OFF is designated automatically.
• Data input errors
Errors sometimes occur in the Data Bank at the time of input.
(1) RECORDS FULL
The maximum number of RECORD divisions for either TEL or MEMO is 253. If an
attempt is made to input a 254th RECORD division, the unit displays a "RECORDS
FULL!" warning, indicating that data cannot be input into the RECORD above this
number.
(Display)
(2 DATA FULL
The total combined memory capacity for TEL and MEMO is 929 characters. If an
attempt is made to input over that amount, the unit displays a "DATA FULL!' warning.
indicating that input over this amount cannot be made
Calculation Function
• Prior to beginning calculation
• Calculation can be performed both in the input mode and output mode.
• Calculations can be performed both in the finger mode and touch mode. But memory
calculations can't be performed in the finger mode.
• When beginning calculation, press the B3 key (in the finger mode, be sure to press the
c=bkey below the display window) and verify that the display shows 0 .
• Calculation does not affect the Data Bank.
_
• Corrections
• If a numerical key is erroneously pressed, press Q immediately (in the finger mode, be
sure to press the [fj key below the display window) then press the correct numerial key
and continue the calculation.
• If a calculation instruction key ( O , B , Q , B ) is erroneously pressed, press the
correct instruction key and continue.
52

Casio PF-8000 Specifications

General

Brand	Casio
Model	PF-8000
Category	Calculator
Language	English