Casio QT-2100 Service Manual

— 4 —
3. INITIALIZE (MAC) OPERATION
3-1.How to initialize QT-2100 terminal
Preparation:
1. All peripheral devices and QT-2100 terminals of this cluster
should be turned off.
2. Connect all of the peripheral devices (such as printer, display
etc.) to QT-2100 terminal.
3. Connect all QT-2100 terminals by in-line.
Operation:
4. Turn on all peripheral devices of a QT-2100 terminal.
5. Turn on this QT-2100 terminal with pressing the left-most key of
the top row and release the key after buzzer sounds.
6. After releasing the key, enter “other = 1000, USA = 2000” and
press the right part of the <ST> key.
7. Data:
Enter the current date (YY/MM/DD order) and press the <YES>
key.
8. Time:
Enter the current date (HH/MM/SS order) and press the <YES>
key.
9. ID Character:
In ID character field, the auto-defined ID No. is shown.
We recommend that you should not change the value.
Date 01-10-10
Time 12:34 00
Check System Master
Check Cluster ID 0
ID Character MC #01
R/J/Order Printer(1) No
R/J/Order Printer(2) No
R/J/Order Printer(3) No
Slip Printer No
OK? YES
Time 12:34 00
Check System Master
Check Cluster ID 0
ID Character MC #01
R/J/Order Printer(1) No
R/J/Order Printer(2) No
R/J/Order Printer(3) No
Slip Printer No
OK? YES
Date 01-10-10
Check System Master
Check Cluster ID 0
ID Character MC #01
R/J/Order Printer(1) No
R/J/Order Printer(2) No
R/J/Order Printer(3) No
Slip Printer No
OK? YES
Date 01-10-10
Time 12:34 00
Check System Master
Check Cluster ID 0
ID Character MC #01
R/J/Order Printer(1) No
R/J/Order Printer(2) No
R/J/Order Printer(3) No
Slip Printer No
OK? YES
Date 01-10-10
Time 12:34 00

Casio QT-2100 Specifications

General

Brand	Casio
Model	QT-2100
Category	Cash Register
Language	English