Casio SE-S10 Quick Programming Guide

Load Memory Protection Batteries and Paper Roll
A) Remove the printer cover
B) Open Battery compart
ment cover
C) Insert 2 new “AA” type batteries
into the compartment
D) Install the supplied 58mm thermal paper roll by lifting up
the platen arm (Push open button) and placing the paper
roll into the printer well. Close the cover firmly.
1
Initialize Your Cash Register
2
A)
Insert the supplied key and turn
to the “OFF” position.
B)
Plug the power cord into the AC outlet and wait for
the instructional messages to print.
IMPORTANT Be sure that the plus (+) and minus (-) ends of the batteries
are facing in the directions indicated in the illustration inside the
battery compartment.
To prevent losing all of your settings and sales
data, we recommend you install the two memory
protection batteries.
Choosing the Language
3
A) For English select the following:
Please also refer to printout instructions from the cash register
To set for
journal
printing
:
To set for receipt printing
:
A)
Turn key to the PGM position
B)
Perform steps below.
Setting Date and Time
4
A)
Input date and time as indicated on the printout chit on the cash
register
A) Turn key to the
Z position
B) Perform the following sequence
Note: This operation automatically sets correct tax
rates, rounding, and receipt formats to Australian
standards.
Setting for Australian Standards
6
6
A) Turn key to the PGM position
position
B) Press
To enable
C) Press
Press departments as required
D) Press
If using shift departments
otherwise skip this step
To disable use same sequence except use in place of
Australian Quick Programming Guide
Casio SE-S10 (please refer to the supplied “User Manual” for further information)
“
14
Flash Report
A flash report
is a useful tool
to monitor how much money has been taken throughout the trading day
.
A) Turn Key to the X position
B) Press
Electronic Journal Report
The electronic journal records most operations that are performed at the cash register. Data can be printed out
if a hard copy is required and it is also possible to designate a read range by date and or consecutive number.
(Please refer to the user manual for additional information on this feature)
Note: This operation will print and reset the Electronic Journal print only is performed from X mode please refer User Manual for more
details
.
The following operation will print the end of day financial report.
Note: Using X Mode will print only while Z Mode will print and reset the figures ready for the next trading day.
16
Daily End of Day Report
15
A) Turn Key to the Z position
B) Enter 58
A)
Turn key to the PGM position
B)
Perform steps below.
Setting GST to Departments
7
5
Printer switch for receipt or Journal
All manuals and user guides at all-guides.com
all-guides.com

Casio SE-S10 Specifications

General

Types of payment	Cash
Number of clerks/departments	20
Number of Price Look-Up codes (PLUs)	500 PLUs
Supported paper width	57.5 mm
Backlight	Yes
Display digits	8 digits
Display number of lines	1 lines
Dimensions (WxDxH)	330 x 360 x 203 mm
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	120/230 V
Power consumption	100 mA

Weight and Dimensions

Weight	4100 g