Casio SF-4400 User Manual

PART 4 Timekeeping Functions
Using the Home Time function @
To set the Home Time zone
1.
Press
HOMEWORLD
Io
display
the
current
Home
Time.
LON
JAN’ 171994 SAT
an 12:00
2.
Press
FUNC
twice
to
display
the
tunction
menu
for
the
ZONE
CHANGE
operation.
1 LANGUAGE
§ SONE KERE EDIT
ie DATE .FORMAT
3. Press 2 to select ZONE CHANGE.
City
code——+LON
1-12:880
es
¢
The
current
zone
flashes
on
the
World
Map
display.
Its
city
code
is
also
shown.
+
You
can
edit
city
code
names.
See
“To
edit
a
city
code
name”.
4.
Use
the
<
and
D
cursor
keys
to
move
the
flashing
time
zone
on
the
World
Map.
Note
that
the
city
code
changes
as
you
do.
5.
When
the
time
zone
that
you
want
for
the
Home
Time
is
flashing
{and
the
city
56
rth en
58
code
you
want
is
shown
on
the
display),
Press
SET
to
register
the
new
zone.
HKG
JAN’ 171994 SAT
fi 8:00
PART 4_ Timekeeping Functions
To switch the Home Time between standard and
daylight saving time
1. Display the current Home Time.
2. Press FUNC once to display the first function menu.
3. Press 3 to select DST ON/OFF.
« The standard/DST setting is set up as a foggle setting. This means that each
time you select the DST ON/OFF item in the function menu, the Home Time
display switches from its present setting to the opposite one.
« The following shows an example display with the DST indicator (which
indicates that DST is on).
LON
JAN’ 171994 SAT
a 1:16 28mm
To set the Daily Alarm
Display the current Home Time.
Press DISP CHNG to display the current daily alarm setting.
Press FUNC once to display the first function menu.
Press 1 to select ALARM TIME SET.
‘The alarm’s hour setting on the display flashes because itis selected.
Use the <] and D> cursor keys or DATE/TIME to move the flashing selection
between the hour and the minutes setting. When either value is selected
(flashing), you can change it by entering a new value.
+ Use 12-hour format if the Home Time is set for 12-hour format or 24-hour
format if the Home Time is set for 24-hour format.
. He vou are using 12-hour time format, press A to specify AM or P to specify
« Allillegal input (26 for the hour, 65 for the minutes) is ignored.
6. After you set the alarm time, press SET to store it.
ge pena
To set the Home Time
1. Display the current Home Time.
2.
Press
FUNC
once
to
display
the
function
menu
for
the
HOME
TIME
SET
operation.
3. Press 1 to select HOME TIME SET.
+ The current hour setting on the display flashes because it is selected.
4. Use the <j and D cursor keys or DATE/TIME to move the flashing
selection around the Home Time display. When any number is selected
(flashing), you can change it by entering a new value.
+ You can change the Home Time setting even if summer time (DST).is
selected,
+ Use 12-hour format if the Home Time is set for 12-hour format or 24-hour
format if the Home Time is set for 24-hour format.
+ Ifyou are using 12-hour time format, press A to specify AM or P to specify
PM. :
* Alfitlegal input (26 for the hour, 65 for the minutes) is ignored.
» Years can be input within the range of 1901 through 2099.
» You can enter 20th century years using only two digits (94 ~+ 1994). 21st
century years must be entered in four digits.
5. After you set the time and date, press SET to store them,
» The seconds count of the timepiece resets to “00” when you press SET,
To switch the Home Time between 12-hour and 24chour format
. Display the current Home Time. ei
Press FUNC once to display the first function menu. £
Press 2 to select 12/24 HOURS.
The 12-hour/24-hour setting is set up as a fogg/e setting. This means that
each time you select the 12/24 HOURS item in the function menu, the Home
Time display switches from its present setting to the opposite one.
The
12-hour/24-hour
setting
you
make
is
applied
for
the
time
displays
in
the
Schedule
Keeper,
Reminder
Mode,
Home
Time
and
World
Time
display.
<
sons
Using the Home Time function
To switch the daily alarm on and off
. Press FUNC once to display the first function menu.
. Press 4 to select the SOUND menu item.
. Use 4 and V to select DAILY AL.
. Use <J and D to switch the daily alarm on and off.
. Press SET to store your setting and clear the SOUND menu.
AEawns
About the daily alarm.
Once you set the daily alarm, it sounds at the same time every day (as long
as the DAILY AL setting is ON), When the daily alarm time is reached, the
alarm sounds for 20 seconds and the daily alarm display appears (even if
the SF Unit is switched off). Press any key to stop the alarm and return to
the display that was shown before the alarm began to sound.
Note the following important points when you are using the daily alarm.
* The daily alarm does not sound if the daily alarm time is reached during
data communications.
* The alarm may fail to sound of battery power is too low.
To select the date format
1. Display the current Home Time.
2. Press FUNC twice to display the second function menu.
3. Press 4 to select DATE FORMAT.
4. Select a format by entering its number.
* The following shows and exampie of each format
M/D/Y: JAN/1/1994 SAT
DIM/Y: 1/3AN/1994 SAT
YIM/D: 1994/1/1 SAT
58

Casio SF-4400 Specifications

General

Brand	Casio
Model	SF-4400
Category	Calculator
Language	English