Casio TK-2300 User Manual

Advanced Registration Functions
ee
Printed text: “SPECIAL PRICE NO. 123”
Operation Receipt
=
SPECIAL
PRICE
|
(CAP
[SIPIENCIMANLIISPACE[PIIRY
[CHE]
DEPARTMENT
2
10.00
Fa) 1000 “o" ) Ca Ho. 123 |
[CAP
][N][SHIFT}O][CAP.][.[SPACE][DBL]{1]
PLU
1
“1.10
[SPACE}[DBL][2]
[SPACE][3]
(2:
(ot)
(me
Baas
aoa
'
|
4-22 Printing Slips
Slip Printer To perform batch printing on the slip printer, you must first use the
Memory memory allocation operation (see Program 5 Mode in the Programming
Manual) to reserve slip buffer memory. The capacity of the slip buffer
memory is determined by the number of units of slip buffer memory
reserved by the memory allocation operation.
The register can be programmed to check the status of the slip buffer
memory whenever slip batch printing is performed, and to sound an alarm
when the buffer memory is almost full. The alarm sounds when there are 13
lines or less remaining, and once it starts to sound, the only operation you
can perform is the cancel operation or operations using one of the following
keys.
C78), Co), Cee, Go a) GD, Bs, (ee, ee GE I,
(%J, (4%) key operation, cancel operation
You must perform one of the above operations when the slip buffer alarm
sounds on a register programmed for “check slip buffer memory”. Any other
operation results in an error. Note that the register checks the slip buffer
memory status only when it is programmed to do so. If the register is not
programmed to “check slip buffer memory,” registration will never be
interrupted because of insufficient buffer capacity, but data that exceeds
buffer capacity will not be printed on the slip.
Printing
Slips
The
cash
register
can
be
connected
to
the
optional
SP-1100
Slip
Printer,
which
features
an
automatic
feed
function
and
automatic
back
feed
function.
e Automatic Feed Function
This function makes it possible to program the number of line feeds that
should be inserted from the normal print start position before starting slip
alternate printing or slip batch printing of a new slip. Even if line feeds
are programmed for this function, they are not inserted for validation
printing, check endorsement printing, and check printing performed using
the slip printer. Note also that line feeds are not inserted automatically at
the beginning of a second slip when the transaction requires printing that
extends from one slip to another.
e Automatic Back Feed Function
This function performs automatic back feed following alternate printing,
batch printing, validation printing, and endorsement printing on the slip
printer. The slip paper is released once the back feed operation is
complete. This function can be canceled by programming.
e¢ Manual Feed Function
The Slip Feed/Release key (assigned to the register’s keyboard using the
Program 4 mode) can be used for the manual feed of the slip paper. You
perform manual feed by inputting a value fir the number of lines (up to
two digits in the range of 1 to 99) and then pressing the Slip
Feed/Release key.
53

Casio TK-2300 Specifications

General

Brand	Casio
Model	TK-2300
Category	Cash Register
Language	English