Casio WK-3000 User Manual

E-48
Mixer Function
735A-E-050B
Using the Parameter Edit Mode
Editing the Parameters for Channels
1 through 16
In the Parameter Edit Mode, you can change the settings of
ten different parameters (including tone, volume, and pan
pot) for the channel you selected on the Mixer screen.
To change parameters
1 Press the MIXER button.
• This causes a pointer to appear on the display next to
MIXER.
2 Press a CHANNEL button (1 through 16) to select a
channel.
• Use the [왗 ] and [왘] CURSOR buttons to change
between channels.
3 Use [왖] and [왔] CURSOR buttons to select the
parameter whose setting you want to change.
Example: Select volume setting by displaying “Volume”.
• Each press of [왖] or [왔] CURSOR button cycles
through the parameters.
• You can use the [왗] and [왘] CURSOR buttons to
change to another channel at any time during this
procedure.
Indicates channel volume of 127
Vo l ume
Vo l ume
4 Use the number buttons or [+] and [–] to change
the parameter setting.
Example: Change the setting to “060”.
• Pressing the MIXER or EXIT button exits the
parameter edit mode.
Editing DSP Channel Parameters
1 Press the CHANNEL (DSP) button.
• You can also select the DSP channel by pressing the
[왘] CURSOR button while Channel 16 is selected.
• This selects the DSP channel.
• Pressing the [왗] CURSOR button while the DSP
channel is selected returns to Channel 16.
CHANNELMIXER
CURSOR
Number buttons
[+]
/
[–]
WK3100_e_47-58.p65 04.3.26, 0:11 PM48

Casio WK-3000 Specifications

General

Brand	Casio
Model	WK-3000
Category	Electronic Keyboard
Language	English