E-62
Using the Performance Mode
You can use the Performance Mode to perform with up to four
tones assigned to the keyboard. In addition to tone
assignments, you can also save effect, Step Sequencer, and
other settings as a setup (called a “performance”) which can
be recalled at any time, even while you are playing, to
instantly change the sequencer’s setup.
• There are 100 preset performances. You can edit preset
performances and save it as one of 100 user performances.
See the separate “Appendix” for a list of preset
performances.
1.
Press
7
PERFORM.
The button will light and the Synthesizer will enter the
Performance Mode.
2.
Select a performance bank and number the
same procedures as those for selecting a tone.
3.
Press
7
EDIT.
This will display the top screen of the performance editing
list.
4.
Select items and change settings on the screen
using the same procedures as those used when
selecting a tone.
• For details about editing, see “Editable Performance
Parameter List” on page E-64.
5.
After you finish with your edits, press
7
EDIT.
This exits the editing list.
6.
Press
7
WRITE and then save your edited
performance as a user performance.
• For information about how to save user data, see the
procedure for saving user tone data (page E-12).
■ Saving User Performance Data to an External
Device
• Memory card (page E-73)
• Computer (page E-79)
8
2
9
7
bq
3
Overview
Registering and Recalling
Performances
To register a performance
Press
bq
left (U) to advance to
the screen below.
3
K1 to K4 knob functions
(page E-64)
Zone 1 to 4 on/off and
keyboard range setting
screen (page E-64)
Use
bq
up (q) / down (w)
to select a zone to edit
(page E-64).
Zone 1 to 4 on/off and keyboard range settings
To Next Page
Loading...
Need help?
General
