• This unit is not designed to be installed in an RV or used with an inverter.
• The electrical safety of the device is only guaranteed if the device is connected to
a properly installed protective conductor system. Operations using an electrical
outlet without a protective conductor are prohibited. If in doubt, have the house
installation checked over by a qualified electrician. The manufacturer cannot be
made responsible for damages that are caused by a missing or damaged
protective conductor.
Options to connect the power cord
1) Plug the mains plug into a ground socket below the device.
2) Place power cord under carpet, to avoid stumbling over the cord.
3) Slot power cord through the supplied slot for the power cord.
Danger
► The mains plug must be plugged firmly into the connection socket on the bottom
of the device, otherwise there is a risk of fire.
4 Design and Function
This chapter provides you with important safety notices on the design and function of
the device.
4.1 Complete overview
To Next Page
Loading...
Need help?
General