To Next Page

To Previous Page

CBI Astute

Instruction Manual

Page 4

3990A963 REV B

Installation - Astute Smart Isolator (ASI)

1. This device must be installed by a qualied electrician

2. Isolate supply before installing the ASI

3. Install the ASI in the outlet box

4. Connect the ASI according to Figure 5. Observe markings for line

and load terminals.

5. To power the ASI press the isolation switch to ON (refer to

Figure 6). Once power is ON the LED will light up.

6. Download and install the CBI Home App from either the App Store

or on Google Play

Figure 5: ASI installation

LED (BLUE / RED)

POWER BUTTON

ISOLATION SWITCH

Figure 6: ASI front face

Isolation Switch - Turn off isolation switch to isolate the

load. Always turn off isolation switch before performing

an insulation resistance test on the installation. Turning

the isolation switch off for 1 second will reboot the ASI.

PLEASE NOTE:

Line and load cannot be

reversed. If reversed the

device will not power up.

TERMINALS

Questions and Answers:

Need help?

Do you have a question about the CBI Astute Series and is the answer not in the manual?

CBI Astute Series Specifications

General