18
Mains Electricity Connection
Warning! This appliance must be earthed
We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will comply
with the I.E.T. and local regulations.
This appliance is intended to be
connected to xed wiring and is not
suitable for connection to a 13A plug
or 13A supply.
This appliance is intended to be
connected to fixed wiring by a
double pole switch, having a contact
separation of at least 3mm in all poles.
The switch must be positioned no
further than 2m from the appliance.
Please note:
• The mains cable is not user
replaceable so must only be replaced
by a qualified electrician or service
engineer. Consult CDA for advice if
the mains lead needs to be replaced.
• The marking of the current rating of
the fuse or circuit breaker protecting
this appliance should be marked on
Fig. 3
L N E
To Next Page
Loading...
Need help?
General
