20
In the event of a fault with the hob, please advise CDA Customer Care
of any fault code shown on the display
Contact CDA Customer Care
A: Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T: 01949 862 012 F: 01949 862 003
E: service@cda.eu W: www.cda.eu
Troubleshooting
On rst use
You observe that Possible Causes What should you do?
The hob does not work and the
lights on the control panel do not
switch on.
The key lock is set
Touch and hold the key lock key
to turn the key lock o.
Installation blows a fuse.
The electrical connection of the
hob is incorrect
Check that it is set up properly
(see the Electrical Connection
section)
You observe that Possible Causes What should you do?
The hob does not work and the
lights on the control panel do not
switch on.
Electrical connection fault. Check the power supply.
Protection circuit breaker or fuse
has tripped.
Replace the fuse or reset the
circuit breaker.
A small object, grease or water is
on one of the control keys.
Check the control keys are clean
and no objects are on them.
9 fast frying steaks
On switching on
To Next Page
Loading...
Need help?
General
