CEM DT-9880 User Manual

8.1 Take picture function
On the HCHO mode,you can see icon,and these icon corresponding
to F1,F2,F3 button,press F1 can enter picture taking mode. Icon will
appear,you can press F2 button to take picture.Press ESC button to exit this mode.
8.2 Take video function
On the HCHO mode,you can see icon,and these icon corresponding to
F1,F2,F3 button,press F2 can enter video taking mode,Press the RUN/STOP button to start the
HCHO measurement,The LCD display icon,press F2 button to take video and
press F2 button again to stop take video,The video file will be auto to saved.Press ESC button
to exit this mode.
8.3 HCHO Setup mode
On the HCHO mode,you can see icon,and these icon corresponding
to F1,F2,F3 button,press F3 can enter the Setup mode,on this mode,you can setup any parameter
you want.Use the or button to select any option you want to setup.Then press ENTER button
to confirm the parameter.
Start Delay
Set the waiting time before the start of measurement.Press ENTER button to select the time and
adijust the time with the or button.
Video Borescope User Manual
Particle Counter User Manual
12
www.eastern-energy.com

CEM DT-9880 Specifications

General

Brand	CEM
Model	DT-9880
Category	Measuring Instruments
Language	English