equipped with a starter safety
switch designed to permit starting
the engine only when the trans-
mission
is
in the "Park" or "Neu-
tral"
position.
For
additional
engine braking effect,
as
sometimes
needed in mountainous driving,
place the transmission in an inter-
mediate or low range.
Column Shifl Lever
The heavy line in the illustrations
indicates the movement of the shift
lever
as
it
is
lifted to shift into Re-
verse or Low (Low on the Turbo
Hydra-Matic
350 and 400) and
into or out of Park position.
Floor Console Shift Lever
The floor console shift lever may
be moved freely between Neutral
and Drive and ( on the Turbo
Hydra-Matic
350 and 400) be-
tween 1 and 2. Squeeze shift lever
button under handle as you shift
into Reverse or Low
(2
on Turbo
Hydra-Matic
350
and
400).
Squeeze the button under the
Turbo Hydra-Malic 350 and 400
P-PARK
R-REVERSE
Console
N-NEUTRAL
3
D-DRIVE
2
L.-LOW.
1
L.-LOW.
Use
only
when
car
is
stopped.
For
backing
car-from
stop.
For
standing
(Brakes
Applied)
For
forward
driving. Depress accelerator
to
floor
for
extra
accelerator below
65
mph;
depress
accelerator
half-way
at
speeds below
30
mph.
For
driving
in heavy
traffic
or
on hilly
terrain.
Shift
into
L.
or
2
at
any
vehicle speed.
For
hard
pulling
through
sand,
snow
or
mud,
for
climb-
ing
or
descending
steep
grades_
15
handle fully when shifting into or
out of the Park position. Exercise
care when squeezing button to
prevent unintentional shifts to
Park, Low (or
2)
or Reverse.
NOTE: Shift quadrant for all
Automatic Transmissions
is
located
on the instrument cluster.
To Next Page
Loading...
Need help?
General
