Remote Keyless Entry (RKE)
System Operation
The Remote Keyless Entry (RKE) transmitter functions
will work up to 195 feet (60 m) away, however, the
operating range may be less while the vehicle is running.
There are other conditions which can affect the
performance of the transmitter. See Remote Keyless
Entry (RKE) System on page 2-4
/(Remote Vehicle Start): If your vehicle has this
feature, press
/to start the engine from outside
the vehicle using the RKE transmitter. See Remote
Vehicle Start on page 2-7
Q(Lock): Press Qto lock all the doors. The interior
lamps will turn off after all of the doors are closed.
If enabled through the Driver Information Center (DIC),
the remote lock feedback can be programmed to
have the horn chirp and/or the turn signals flash
when the RKE transmitter is used to lock the vehicle’s
doors. See “LOCK HORN” and “LIGHT FLASH”
under DIC Vehicle Personalization on page 3-48
Pressing
Qmay also arm the content theft-deterrent
system. See Content Theft-Deterrent on page 2-18
K(Unlock): Press K to unlock the driver’s door.
If
K is pressed again within five seconds, all remaining
doors will unlock. The interior lamps will turn on and
stay on for 20 seconds or until the ignition is turned on.
If enabled through the DIC, the remote unlock feedback
can be programmed to have the horn chirp and/or the
turn signals flash when the RKE transmitter is used to
unlock the vehicle’s doors. See “UNLOCK HORN” and
“LIGHT FLASH” under DIC Vehicle Personalization
on page 3-48.
With Remote
Start Shown, Without
Remote Start Similar
2-5
To Next Page
Loading...
Need help?
General
