Chevrolet Equinox 2019 User Manual

Chevrolet Equinox Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
12145779) - 2019 - crc - 3/29/18
306 Vehicle Care
4. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the socket.
5. Replace the bulb and reverse
Steps 1–4 to reinstall.
Taillamps
Driver Side Shown, Passenger
Side Similar
1. Sidemarker
2. Stoplamp/Taillamp/Rear
Turn Signal
To replace one of these lamps:
1. Open the liftgate. See Liftgate
0 42.
2. Remove the two screw covers
from the taillamp assembly.
3. Remove the two screws
securing the taillamp assembly.
4. Pull the taillamp assembly out
of the vehicle body.
5. Disconnect the lamp wiring
harness.
6. Turn the bulb socket
counterclockwise and pull
it out.
7. Pull the bulb straight out of the
socket.
8. Install the new bulb.
9. Push the bulb socket in and
turn it clockwise.
10. Reverse Steps 2–5 to reinstall
the lamp assembly.
License Plate Lamp
Lamp Assembly
Bulb Assembly

Chevrolet Equinox 2019 Specifications

General

Brand	Chevrolet
Model	Equinox 2019
Category	Automobile
Language	English