Chevrolet Equinox 2021 User Manual

Chevrolet Equinox Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
14420010) - 2021 - CRC - 7/29/20
Vehicle Care 301
Storing the Tire Sealant and
Compressor Kit
To access the tire sealant and
compressor kit:
1. Open the liftgate. See Liftgate 0 17.
2. Fold the rear part of the load floor to
the front.
3. Turn the retainer nut counterclockwise to
remove the tire sealant and compressor
kit bag.
4. Remove the tire sealant and compressor
kit from the bag.
To store the tire sealant and compressor kit,
reverse the steps.
Tire Changing
Removing the Spare Tire and Tools
1. Tow Eye (If Equipped)
2. Capless Funnel Adapter (If Equipped)
3. Wheel Wrench
4. Strap
5. Jack
6. Screwdriver (If Equipped)
To access the spare tire and tools:
1. Open the liftgate. See Liftgate 0 17.
2. Fold the rear part of the load floor to
the front, pull it rearward to disengage
the clips, then pull upward to remove it.
3. Pull the spare tire cover forward and
upward to remove it.
4. Turn the retainer nut counterclockwise to
remove the spare tire. Place the spare
tire next to the tire being changed.
5. The jack and tools are stored below the
spare tire. Remove them from their
container and place them near the tire
being changed.
Removing the Flat Tire and Installing the
Spare Tire
Take off the wheel cover or center cap,
if the vehicle has one, to reach the wheel
bolts.
1. Do a safety check before proceeding. See
If a Tire Goes Flat 0 294 for more
information.
2. Turn the wheel wrench counterclockwise
to loosen and remove the wheel nut
caps. Do not try to remove plastic caps
from the cover or center cap.
3. Pull the cover or center cap away from
the wheel. Store the wheel cover in the
cargo area until you have the flat tire
repaired or replaced.

Chevrolet Equinox 2021 Specifications

General

Brand	Chevrolet
Model	Equinox 2021
Category	Automobile
Language	English