Cisco 1830 Series User Manual

4
Model numbers ending in C are, by default, factory-shipped with a Cisco Mobility Express software
image. For more information, see the Cisco Mobility Express User Guide at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_Guid
e.html
Access Point Features
The features of the 1830 series access points are:
• Supported mode(s) of operation:
– Centralized
• Supports Cisco Mobility Express solution. The 1830 series access point can operate as a master
AP (having an integrated wireless controller functionality) in a Cisco Mobility Express network.
For more information, see the Cisco Mobility Express User Guide at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_
Guide.html
• Radio features supported are:
– 2.4 GHz and 5 GHz concurrent radios
– 2 GHz radio with 3TX x 3RX and two spatial streams SU-MIMO
– 5 GHz radio with 3TX x 3RX 802.11ac Wave 2 capable with two spatial streams SU-MIMO
and MU-MIMO
– 802.11ac based Transmit Beamforming
– Quality of Service (QoS)
– Radio Resource Management (RRM)
– Rogue Detection
– BandSelect
• The AP supports the following hardware external interfaces:
– RS-232 Console Interface through RJ-45
– Local Power DC Jack
– Mode button. For information on how to use the Mode button, see “Using the Mode Button”
section on page 23.
– USB 2.0 port (No software support at this time)
– One multi-color LED status indicator. See the “Checking the Access Point LEDs” section on
page 21 for information on the colors of the LED status indicator.

Cisco 1830 Series Specifications

General

Brand	Cisco
Model	1830 Series
Category	Wireless Access Point
Language	English