Cisco 2621XM User Manual

5
Cisco 2621XM and Cisco 2651XM Modular Access Routers with AIM-VPN/EP FIPS 140-2 Non-Proprietary Security Policy
OL-6262-01
The 2621XM/2651XM Router
Figure 3 Cisco 2621XM and Cisco 2651XM Rear Panel LEDs
Figure 4 shows the front panel LEDs, which provide overall status of the router's operation. The front
panel displays whether or not the router is booted, if the redundant power is (successfully) attached and
operational, and overall activity/link status.
Figure 4 Front Panel LEDs
Table 2 provides more detailed information conveyed by the LEDs on the front panel of the router:
Table 1 Cisco 2621XM and Cisco 2651XM Rear Panel LEDs and Descriptions
LED Indication Description
LINK Green An Ethernet link has been established
Off No Ethernet link established
FDX Green The interface is transmitting data in full-duplex mode
Off When off, the interface is transmitting data in half-duplex mode
100 Mbps Green The speed of the interface is 100 Mbps
Off The speed of the interface is 10 Mbps or no link is established
99495
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2A/S
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2A/S
Cisco 2621
W0
W1
AUX
CONSOLE
10/100 ETHERNET 0/0
10/100 ETHERNET 0/1
10/100BASE-T
Ethernet 0/0
(RJ-45)
10/100BASE-T
Ethernet 0/1
(RJ-45)
Auxiliary
port (RJ-45)
Console
port (RJ-45)
FDX
LED
FDX
LED
Link
FDX
FDX
Link
LED
100 Mbps
1
00 Mbps
LED
Link
Link
LED
100 Mbps
100 Mbps
LED
POWER RPS ACTIVITY
99496

Cisco 2621XM Specifications

General

Brand	Cisco
Model	2621XM
Category	Network Router
Language	English