Cisco 2621XM User Manual

6
Cisco 2621XM and Cisco 2651XM Modular Access Routers with AIM-VPN/EP FIPS 140-2 Non-Proprietary Security Policy
OL-6262-01
The 2621XM/2651XM Router
All of these physical interfaces are separated into the logical interfaces from FIPS 140-2 as described in
Table 3:
Table 2 Cisco 2621XM and Cisco 2651XM Front Panel LEDs and Descriptions
LED Indication Description
Power Green Power is supplied to the router and the router is operational
Off The router is not powered on
RPS
1
1. RPS = Redundant Power System
Green RPS is attached and operational
Off No RPS is attached
Blink RPS is attached, but has a failure
Activity Off In the Cisco IOS software, but no network activity
Blink (500 ms ON, 500 ms OFF) In ROMMON, no errors
Blink (500 ms ON, 500 ms OFF,
2 sec between codes)
In ROMMON, error detected
Blink (less than 500 ms) In the Cisco IOS software, the blink rate reflects the level of activity
Table 3 Cisco 2621XM and Cisco 2651XM FIPS 140-2 Logical Interfaces
Router Physical Interface FIPS 140-2 Logical Interface
10/100BASE-TX LAN Port
WIC Interface
Network Module Interface
Console Port
Auxiliary Port
Data Input Interface
10/100BASE-TX LAN Port
WIC Interface
Network Module Interface
Console Port
Auxiliary Port
Data Output Interface
10/100BASE-TX LAN Port
WIC Interface
Network Module Interface
Power Switch
Console Port
Auxiliary Port
Control Input Interface

Cisco 2621XM Specifications

General

Brand	Cisco
Model	2621XM
Category	Network Router
Language	English