4021196 Rev A 83
Manage the Gateway
Administration > Factory Defaults
The Administration Factory Defaults page allows you to restore the configuration to
its factory default settings. Select the Factory Defaults tab to open the
Administration Factory Defaults page.
CAUTION:
If you restore the factory defaults, the gateway will lose all of the settings you
have entered. Before you reset the gateway to its factory default settings, write
down all of your custom settings. After the defaults have been restored, you
will have to re-enter all of your configuration settings.
Restore Factory Defaults
To restore factory defaults, click Restore Factory Defaults to reset all configuration
settings to their default values. Any settings you have saved will be lost when the
default settings are restored.
To Next Page
Loading...
Need help?
General