Cisco 4351 ISR User Manual

5-4
Hardware Installation Guide for the Cisco 4000 Series Integrated Services Router
OL-32185-02
Chapter 5 ROM Monitor Overview and Basic Procedures
Access ROM Monitor Mode
Router# show romvar
ROMMON variables:
PS1 = rommon ! >
TFTP_FILE = /noash/overlord_627.bin
DEFAULT_GATEWAY = 50.0.0.1
TFTP_SERVER = 172.18.40.12
IP_SUBNET_MASK = 255.255.255.0
MCP_STARTUP_TRACEFLAGS = 00000000:00000000
RET_2_RTS =
? = 0
LICENSE_BOOT_LEVEL = adventerprise,all:esg;
IP_ADDRESS = 172.18.40.56
BSI = 0
RET_2_RCALTS =
RANDOM_NUM = 1707176976
Router# reload
rommon 1 > set
PS1=rommon ! >
SR_INIT_SHELL=aux_do_system_shell
TFTP_FILE=/noash/overlord_627.bin
DEFAULT_GATEWAY=50.0.0.1
TFTP_SERVER=172.18.40.12
IP_SUBNET_MASK=255.255.255.0
MCP_STARTUP_TRACEFLAGS=00000000:00000000
RET_2_RTS=
?=0
LICENSE_BOOT_LEVEL=adventerprise,all:esg;
IP_ADDRESS=172.18.40.56
BSI=0
RANDOM_NUM=1707176976
RET_2_RCALTS=1350127173
Commonly Used ROM Monitor Commands
Table 5-1 summarizes the commands commonly used in ROM Monitor. For specific instructions on
using these commands, refer to the relevant procedure in this document.
Table 5-1 Commonly Used ROM Monitor Commands
ROMMON Command Description
boot image Manually boots a Cisco IOS XE software image.
boot image –o config-file-path Manually boots the Cisco IOS XE software with a temporary
alternative administration configuration file.
confreg Changes the config-register setting.
dev Displays the available local storage devices.
dir Displays the files on a storage device.
reset Resets the node.
set Displays the currently set ROM Monitor environmental
settings.
sync Saves the new ROM Monitor environmental settings.
unset Removes an environmental variable setting.

Cisco 4351 ISR Specifications

General

Brand	Cisco
Model	4351 ISR
Category	Network Router
Language	English