Installation Checklist for site ______________________________________________
Cisco VG name/serial number _____________________________________________
DateVerified
by
Task
Background information placed in Site Log
Environmental specifications verified
Site power voltages verified
Installation site prepower check completed
Required tools available
Additional equipment available
Cisco VG received
Quick start guide received
Regulatory compliance and safety information received
Information packet, warranty card, and Cisco.com card received
Software version verified
Rack, desktop, or wall-mounting of chassis completed
Initial electrical connections established
ASCII terminal attached to console port
Modem attached to console port (for remote configuration)
Signal distance limits verified
Startup sequence steps completed
Initial operation verified
Mounting Tools and Equipment
Obtain the following tools and parts to install a Cisco VG450 Voice Gateway:
• Standard flat-blade screwdriver as required for attaching brackets to rack or wall
• Phillips screwdriver for attaching brackets to a Cisco VG450 Voice Gateway
• Mounting brackets and screws for 24-inch rack, if required:
• Four telco machine screws, for installing the chassis in a rack (use the screw size required by the
rack)
Cisco 450 Voice Gateway Hardware Installation Guide
20
Installing the Cisco VG450 Voice Gateway
Mounting Tools and Equipment
To Next Page
Loading...
Need help?
General