Table 2: Open Caveats for Firmware Release 10.1(1)SR1
DescriptionIdentifier
Display of phone is incorrect when PC port/SW port is 10/10CSCuh34236
Monitoring phone not send RTCPCSCuj16464
Highlighted backgroound has afterimage when switch among calls on 7861CSCuj25165
IPv6 mode phone fail to register if CUCM v4/v6 hostname are differentCSCuj52759
No message indicate for 2nd incoming call if phone is in app menuCSCuj53400
one log recorded when the call is transferred with translation patternCSCuj73412
Group pickup; the call log should not recorded group unmberCSCuj93181
DND beep not played when on hook from handsetCSCuj96094
Phone can't add participant by PD in conference/transferCSCul01193
Press the update SK and then press the back SK navigation harCSCul19064
It will flash secure icon one time after answer a callCSCul19068
The line with '#' in the DN still display on phone's ui in srst modeCSCul28593
DN displaying wrongly during transfer in 7841 phone ModelCSCun07043
78xx :line Led behavior wrong if phone has incoming and hold revert callCSCun30345
missed call number not increased accordinglyCSCun35603
78xx can't access VM when setting media using ipv6 prefer.CSCun35740
Kate overlap the SKCSCun38492
incoming call toast behavior not consentaneousCSCun45084
extra cursor on 7861 when dial quick after cancel previous dialingCSCun45099
Call is dropped unexpectedly after pressing resume softkeyCSCun45165
local/remote ipv6 addr under stream info error in webpageCSCun45175
arabic/Hebrew:v6 gateway/v6 dns/tftp v6 address orientation is wrongCSCun45190
7861:UI still display missed calls state if remote call in holdCSCun46787
Line LED not changed to green for active call if remote hold thereCSCun46904
Cisco IP Phone 7821, 7841, and 7861 Release Notes for Firmware Release 10.1(1)SR1
6
Cisco IP Phone 7821, 7841, and 7861 Release Notes for Firmware Release 10.1(1)SR1
Open Caveats
To Next Page
Loading...
Need help?
General
