Cisco 7861 Manual

Figure 17: Tab Location
To remove the phone and mounting plate from the wall bracket, you must disengage these tabs.
Before you begin
You require two screwdrivers or metal rods.
Procedure
Step 1 Push the screwdrivers into the left and right holes in the phone mounting plate approximately 1 in. (2.5 cm).
Step 2 Lift the screwdriver handles up to push down on the tabs.
Wall Mounts
16
Wall Mounts
Remove the Phone from the Non-Lockable Wall Mount

Cisco 7861 Specifications

General

Brand	Cisco
Model	7861
Category	IP Phone
Language	English