Cisco 7921G Accessory Guide

8
Cisco Unified Wireless IP Phone 7921G Accessory Guide
OL-11926-02
Lock Set for Phone
Procedure
Step 1 Put the cable (with loops at each end) around a post or cable that is used to lock your computer.
Step 2 Put the two loops at the ends of the cable in the C-ring.
Step 3 Insert the C-ring in the slot on the back of the phone.
Step 4 Using the combination lock, fasten the two ends of the C-ring together.
The phone is now secure.
In addition, you can secure the Cisco Unified Wireless IP Phone 7921G Desktop Charger using a laptop
cable lock. The lock connects to the security slot on the side of the desktop charger and the cable can be
secured to a desktop. Figure 4 shows where to insert the lock.
The security slot can accommodate a lock up to 20 mm. Compatible laptop cable locks include the
Kensington® laptop cable lock and other manufacturer’s cable locks that fit into the security slot on the
left side of the desktop charger.
Note Cisco does not supply a laptop cable lock; you must purchase a cable lock from your local electronics
supply source.

Cisco 7921G Specifications

General

Brand	Cisco
Model	7921G
Category	IP Phone
Language	English