© 2006, 2008 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 5 of 7
ORDERING INFORMATION
Table 5 gives ordering information for the Cisco Unified IP Phone 7941G.
Table 5. Ordering Information for Cisco Unified IP Phone 7941G
Part Number Description
CP-7941G Cisco Unified IP Phone 7941G
CP-7941G= Cisco Unified IP Phone 7941G, spare
CP-7941G-CH1 Cisco Unified IP Phone 7941G, channel with license
Note: All Cisco Unified IP phones require the purchase of a phone technology license, regardless of call protocol being used.
POWER CORDS
Table 6 lists the AC country power cords needed for the Cisco Unified IP Phone 7941G.
Table 6. AC Country Power Cords
Part Number Description
CP-PWR-CORD-AP= Asia Pacific
CP-PWR-CORD-AR= Argentina
CP-PWR-CORD-AU= Australia
CP-PWR-CORD-CE= European community
CP-PWR-CORD-CN= China
CP-PWR-CORD-JP= Japan
CP-PWR-CORD-NA= North America
CP-PWR-CORD-SW= Switzerland
CP-PWR-CORD-UK= United Kingdom
ACCESSORIES
Table 7 lists optional accessories available for the Cisco Unified IP Phone 7941G.
Table 7. Optional Accessories
Part Number Description
CP-LCKNGWALLMNT2= Locking wall-mounting kit
CP-WALLMOUNTKIT= Non-locking wall-mounting kit
CP-PWR-CUBE-3= Local power adapter for sites where PoE is not available; refer to the Table 6, “AC Country Power
Cords”, to select the correct regional power cord. CP-PWR-CUBE-3= is compatible with and can
replace CP-PWR-CUBE-2=.
WARRANTY
Cisco Unified IP phones are covered by a Cisco Systems
®
standard one-year replacement warranty.