Cisco 7942 User Manual

Adjusting the ringer
volume:
1. While the phone is idle, press
the Volume button (10) once
to hear a sample of the volume
level.
2. Continue to press the Volume
button (10) to adjust the
volume level.
NOTE: The ringer volume level is
automatically saved.
Adjusting the
handset,
speakerphone, and
headset volume:
1. During an active call, press the
Volume button (10) to
increase or decrease the
volume of your handset,
speakerphone, or headset.
2. To save the volume setting,
press the Save soft key (13).
NOTE: Adjusting and saving the
volume level during a call only
affects the currently active
voice receiver. For example, if
you press the Volume button
(10) when you are using the
Handset (14), you will only
change the handset volume,
not the speaker or headset
volume.
Muting a call:
1. Press the Mute button (8).
2. To disengage mute, press the
Mute button (8) again.
NOTE: If you are using mute along
with your speakerphone, lifting
the Handset (14) will
disengage mute.
Changing the ring:
1. Press the Settings Button (6).
2. Press “1” for User Preferences
or press the Select soft key
(13) when User Preferences is
highlighted.
3. Press “1” for Rings or press the
Select soft key (13) when
Rings is highlighted.
4. With Default Ring highlighted,
press the Select soft key (13).
5. Use the Navigation button (11)
to highlight any ring listed.
6. Press the Play soft key (13) to
sample a ring tone.
7. Press the Select soft key (13)
once the desired ring tone has
been chosen.
1 2
3
4
5
6
7
8
910
1112
13
14
5

Cisco 7942 Specifications

General

Brand	Cisco
Model	7942
Category	IP Phone
Language	English