Cisco APIC M4 User Manual

Power Specifications
Table 7: M4 System Load Estimates
100%75%50%System Workload Factor
409.91 W409.91 W409.91 WMaximum Input Power
409.91 W338.59 W268.24 WInput Power
129.18 W129.18 W129.18 WIdle Input Power
1.72 A1.43 A1.13 AInput Current
48.43 cfm40 cfm31.69 cfmAir Flow
1398.68 BTU/hr.1155.31 BTU/hr.915.28 BTU/hr.Cooling
Table 8: L4 System Load Estimates
100%75%50%System Workload Factor
429.85 W429.85 W429.85 WMaximum Input Power
429.85 W355 W280.83 WInput Power
134.26 W134.26 W134.26 WIdle Input Power
1.81 A1.5 A1.19 AInput Current
50.78 cfm41.94 cfm33.18 cfmAir Flow
1466.71 BTU/hr.1211.31 BTU/hr.958.22 BTU/hr.Cooling
Do not mix power supply types or wattages in the server. Both power supplies must be identical.
Note
You can get more specific power information for your exact server configuration by using the Cisco UCS
Power Calculator:
http://ucspowercalc.cisco.com
The power specifications for the supported power supply options are listed in the following sections.
770 W AC Power Supply
This section lists the specifications for each 770 W AC power supply (Cisco part number APIC-PSU1-770W).
Table 9: 770 W AC Specifications
SpecificationDescription
Cisco APIC M4/L4 Server Installation and Service Guide
38
Server Specifications
Power Specifications

Cisco APIC M4 Specifications

General

Brand	Cisco
Model	APIC M4
Category	Server
Language	English