Cisco ASA 5525-X User Manual

Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Quick Start Guide
6. Run Other ASDM Wizards and Advanced Configuration
Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Quick Start Guide
11
Set the following values to work with the default configuration:
— IP Address—192.168.1.2
— Subnet Mask—255.255.255.0
— Gateway—192.168.1.1
9. Click I accept the agreement, and click Next or Finish to complete the wizard.
10. Quit ASDM, and then relaunch. You should see ASA FirePOWER tabs on the Home page.
6. Run Other ASDM Wizards and Advanced Configuration
ASDM includes many wizards to configure your security policy. See the Wizards menu for all available wizards.
To continue configuring your ASA, see the documents available for your software version at Navigating the Cisco ASA Series
Documentation.
7.Configure the ASA FirePOWER Module
Use ASDM to install licenses, configure the module security policy, and send traffic to the module.
Note: You can alternatively use the Firepower Management Center to manage the ASA FirePOWER module. See the ASA
FirePOWER Module Quick Start Guide for more information.

Cisco ASA 5525-X Specifications

General

Brand	Cisco
Model	ASA 5525-X
Category	Firewall
Language	English