EasyManuals Logo
Home>Cisco>Network Router>ASR 1000 Series

Cisco ASR 1000 Series Replacing

Cisco ASR 1000 Series
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Removing and Replacing FRUs from the Cisco
ASR 1000 Series Routers
This chapter describes procedures for removing and replacing field-replaceable units (FRUs) from Cisco ASR
1000 Series Routers:
Removing and Replacing Cisco ASR 1000 Series Route Processors, on page 1
Removing and Replacing Cisco ASR 1000 Series Route Processor Internal Hard Drive, on page 4
Removing and Replacing the Hard Drive on the Cisco ASR 1002-X Router, on page 13
Removing and Replacing the Hard Drive on the Cisco ASR 1001 Router, on page 16
Removing and Replacing the Cisco ASR 1000 Series DIMM Memory Modules, on page 19
Removing and Replacing Cisco ASR 1000 Router eUSB Devices, on page 40
Removing and Replacing Cisco ASR 1000 Series Router 1 GB USB Flash Token Memory Stick, on
page 47
Minimum Requirements of eUSB Devices Supported on Cisco ASR 1000 Series Routers, on page 49
Removing and Replacing Cisco ASR 1000 Series Embedded Service Processors, on page 50
Removing and Replacing Cisco ASR 1000 Series Router SPAs and SPA Interface Processors, on page
53
Removing and Replacing the Cisco ASR 1006 Router Power Supplies, on page 57
Removing and Replacing the Cisco ASR 1004 Router Power Supplies, on page 71
Removing and Replacing the Cisco ASR 1002 Router Power Supplies, on page 80
Removing and Replacing the Cisco ASR 1013 Router Power Supplies, on page 98
Removing and Replacing the Cisco ASR 1001 Router Power Supplies, on page 107
Repacking the Router, on page 119
Removing and Replacing Cisco ASR 1000 Series Route
Processors
Keep in mind the following points before you remove and replace a Cisco ASR 1000 Series route processor:
The Cisco ASR 1002 Router and the Cisco ASR 1002-F Router support only the integrated Cisco
ASR1002-RP1.
If you have two Cisco ASR 1000 Series route processors in the Cisco ASR 1006 or Cisco ASR 1013
router and you want to remove one, do not power down the router. Remove the route processor and insert
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
1

Other manuals for Cisco ASR 1000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1000 Series and is the answer not in the manual?

Cisco ASR 1000 Series Specifications

General IconGeneral
BrandCisco
ModelASR 1000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals