Cisco ASR 1000 Series Replacing

Removing and Replacing the Cisco ASR 1002 Router Power
Supplies
The Cisco ASR 1002 Router contains the following power supplies:
• AC power supply
• –48 VDC power supply
• +24 VDC power supply
This section contains the procedures to remove and replace these power supplies in the Cisco ASR 1002
Router, Cisco ASR 1002-F Router, and Cisco ASR 1002-X Router.
Unless otherwise noted, the Cisco ASR 1002-F Router AC and –48 VDC power supply and removal and
installation remain the same as the Cisco ASR 1002 Router.
Note
This section contains the following topics:
Removing and Replacing an AC Power Supply in Cisco ASR 1002 Router
This section provides information about removing and replacing an AC power supply in the Cisco ASR 1002
Router.
You must have both power supplies installed in the Cisco router.
Note
The Cisco ASR 1002 Router has two of the same type power supplies in power supply slot 0 and power supply
slot 1. The following figure shows the Cisco ASR 1002 Router AC power supply.
Figure 51: Cisco ASR 1002 Router AC Power Supply
Fan5AC power supply ESD socket1
Captive installation screw6AC power supply slot 0 label2
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
80
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing and Replacing the Cisco ASR 1002 Router Power Supplies

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English