Cisco ASR 9010 User Manual

Example:
Router# show platform
Thu Jul 12 20:50:28.317 UTC
Node Type State Config state
---------------------------------------------------------------------------
0/RP0/CPU0 A99-RP2-SE(Standby) IOS XR RUN NSHUT
0/RP1/CPU0 A99-RP3-SE(Active) IOS XR RUN NSHUT
0/FT0 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/FT1 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/FT2 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/FT3 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/1/CPU0 A9K-8X100GE-TR IOS XR RUN NSHUT
0/FC0 A99-SFC2 OPERATIONAL NSHUT
0/FC1 A99-SFC2 OPERATIONAL NSHUT
0/FC2 A99-SFC2 OPERATIONAL NSHUT
0/FC3 A99-SFC2 OPERATIONAL NSHUT
0/FC4 A99-SFC2 OPERATIONAL NSHUT
0/FC5 A99-SFC2 OPERATIONAL NSHUT
0/FC6 A99-SFC2 OPERATIONAL NSHUT
0/PT1 A9K-AC-PEM-V2 OPERATIONAL NSHUT
0/PT2 A9K-AC-PEM-V2 OPERATIONAL NSHUT
0/PT3 A9K-AC-PEM-V2 OPERATIONAL NSHUT
Step 11 Verify RP3 in slot 1 and RP2 in slot 0 reach full synchronization (NSR-ready state) and status of ALL the
groups is Ready state. Use show redundancy command to verify the same.
Example:
Router# show redundancy
Fri Jul 12 20:51:19.365 UTC
Active Node Standby Node
----------- ------------
0/RP1/CPU0 0/RP0/CPU0(Node Ready, NSR:Ready)
Step 12 Remove standby RP2 (slot 0). Follow the procedure explained in the topic Removing and Replacing Cards
from the Chassis, on page 25.
Step 13 Insert and boot RP3 (slot 0). After booting, RP3 (slot 0) becomes standby RP. Verify using the show platform
command.
Example:
Router# show platform
Thu Jul 12 20:50:28.317 UTC
Node Type State Config state
---------------------------------------------------------------------------
0/RP0/CPU0 A99-RP3-SE(Standby) IOS XR RUN NSHUT
0/RP1/CPU0 A99-RP3-SE(Active) IOS XR RUN NSHUT
0/FT0 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/FT1 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/FT2 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/FT3 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/1/CPU0 A9K-8X100GE-TR IOS XR RUN NSHUT
0/FC0 A99-SFC2 OPERATIONAL NSHUT
0/FC1 A99-SFC2 OPERATIONAL NSHUT
0/FC2 A99-SFC2 OPERATIONAL NSHUT
0/FC3 A99-SFC2 OPERATIONAL NSHUT
0/FC4 A99-SFC2 OPERATIONAL NSHUT
0/FC5 A99-SFC2 OPERATIONAL NSHUT
Replacing Cisco ASR 9000 Series Router Components
32
Replacing Cisco ASR 9000 Series Router Components
Migrating from RP2 to RP3 Card

Cisco ASR 9010 Specifications

General

Brand	Cisco
Model	ASR 9010
Category	Network Router
Language	English