Cisco ASR 9904 Installation Guide

Step 2 Use a scissors jack to remove the chassis from the shipping rack. Place a pallet jack next to the chassis inside
the shipping rack and push/pull the chassis onto the pallet jack for transport to the rack.
Step 3 On the rear of the Cisco ASR 9922 Router is an integrated handle that is used to pull the chassis from the
pallet jack into the rack where the chassis is to be installed.
a) Position the chassis so that the rear handle is facing the front of the rack.
b) From the rear of the rack, pull the chassis by the handle into the rack, making sure that the chassis sits on
top of the guide rails in the rack.
Step 4 On the Cisco ASR 9912 Router, the handles are on the sides of the chassis. Once the chassis is pulled into
the rack and sits on top of the guide rails, use screws to fasten the chassis to the rack.
Figure 120: Installing the Cisco ASR 9010 Router Chassis in a 4-Post Rack
Five screws
(minimum) to
attach the rear
mounting
bracket to the
router chassis
3Five screws
(minimum) to
attach the rear
mounting
bracket to the
rear post of the
rack
2Rear mounting
bracket
1
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
114
Unpacking and Installing the Chassis
Preparing the 19 Inch 45-RU Rack

Cisco ASR 9904 Specifications

General

Brand	Cisco
Model	ASR 9904
Category	Network Router
Language	English