Cisco Catalyst 3560-CX Product Overview

Product Overview
The Catalyst 3560-CX and 2960-CX switches are Ethernet switches to which you can connect devices such
as Cisco IP Phones, Cisco Wireless Access Points, workstations, and other network devices such as servers,
routers, and other switches.
You can deploy these switches outside of the traditional wiring closet environment, such as in office
workspaces, hotel rooms, slot machines, kiosks, and classrooms. The switch is suitable for deployments
where there are space and power constraints (access to power outlets).
See the switch software configuration guide for deployment examples.
This chapter contains these topics:
•
Switch Models, page 1
•
Front Panel, page 2
•
Rear Panel, page 9
•
Management Options, page 13
•
Network Configurations, page 14
Switch Models
Table 1: Catalyst 3560-CX and 2960-CX Switch Models and Descriptions
DescriptionSoftware
Image
Switch Model
8 10/100/1000 Power over Ethernet plus (PoE+) ports (PoE budget of
240 W); 2 Gigabit Ethernet and 2 small form-factor pluggable (SFP)
1
module uplink slots.
IP BaseWS-3560CX-8PC-S
8 10/100/1000 Ethernet ports; 2 Gigabit Ethernet and 2 small form-factor
pluggable (SFP) module uplink slots.
IP BaseWS-3560CX-8TC-S
12 10/100/1000 PoE+ ports (PoE budget of 240 W); 2 Gigabit Ethernet
and 2 SFP module uplink slots.
IP BaseWS-3560CX-12PC-S
Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide
1

Cisco Catalyst 3560-CX Specifications

General

Brand	Cisco
Model	Catalyst 3560-CX
Category	Switch
Language	English