Managing Switch Stacks
• Finding Feature Information, on page 1
• Prerequisites for Switch Stacks, on page 1
• Restrictions for Switch Stacks, on page 1
• Information About Switch Stacks, on page 2
• How to Configure a Switch Stack, on page 11
• Troubleshooting the Switch Stack, on page 18
• Monitoring the Device Stack, on page 19
• Configuration Examples for Switch Stacks, on page 20
• Additional References for Switch Stacks, on page 23
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Switch Stacks
Restrictions for Switch Stacks
There are no restrictions with Horizontal Stacking on Catalyst 3560cx.
Managing Switch Stacks
1
To Next Page
Need help?
General