Cisco Catalyst 6816-X-LE - User Manual

Product Overview
The Catalyst 6840-X switch family consists of four fixed-aggregation switches supporting redundant power
supplies. The chassis has 16/24/32/40 fixed 10-Gigabit SFP+, 1-Gigabit SFP, or 100BASE-FX SFP ports
and also 40-Gigabit uplink ports on selected switch models.
•
Switch Models, page 1
•
Front Panel Components, page 2
•
Rear Panel, page 21
Switch Models
Table 1: Switch Models
DescriptionSwitch Model
16 10-Gigabit SFP+ ports and two power supply slotsCatalyst 6816-X-LE
32 10-Gigabit SFP+ ports and two power supply slotsCatalyst 6832-X-LE
24 10-Gigabit SFP+ports and two 40-Gigabit QSFP+ uplink
ports, and two power supply slots
Catalyst 6824-X-LE-40G
40 10-Gigabit SFP+ and two 40-Gigabit QSFP+ uplink ports,
and two power supply slots
Catalyst 6840-X-LE-40G
Catalyst 6840-X Switch Series Hardware Installation Guide
1

Cisco Catalyst 6816-X-LE Specifications

General

Brand	Cisco
Model	Catalyst 6816-X-LE
Category	Switch
Language	English

Summary

Product Overview

Switch Models

Lists the different Catalyst switch models and their port configurations.

Front Panel Components

Details the physical components located on the front panel of the switches.

SFP and SFP+ Transceiver Module Ports

Explains the SFP/SFP+ ports and their mapping to different switch models.

Power Supply Slots

Management Port

LED Indicators

Status LED

Indicates the system status (operational, alarm states) via color and state.

System ID LED

The blue beacon LED that can be used by the operator to signal attention needs.

Management Port LED

Describes the LED states for the management port (provisioned, linked up, fault).

Fan Tray LED

Indicates the status of the fan tray (power, operation, failure) through its LED.

Power Supply LEDs

Details the states of the OK and FAIL LEDs on the power supply module.

Rear Panel