CHAPTER 2
Hardware Features
This chapter describes the hardware features of Cisco Catalyst Wireless 9166I Series Wi-Fi 6E Access Point
and contains the following sections:
• Access Point Views, Ports, and Connectors, on page 7
• CW9166I (Internal Antenna) Radiation Patterns, on page 9
Access Point Views, Ports, and Connectors
Cisco Catalyst Wireless 9166I Series Wi-Fi 6E Access Point has multiple options that you can use to power
the AP. For information about connectors and ports for the AP models, see Connectors and Ports on the AP,
on page 7.
Environment Sensors
The AP has inbuilt environment sensors that work with Cisco Spaces. There are two visible vents at the top
of the AP. The sensors measure the following environment parameters:
• Ambient air temperature sensor
• Air quality sensor (Total Volatile Organic Compounds [TVOC])
• Relative humidity sensor
For more information on how to configure the AP sensor in Cisco Spaces, see the AP as a Sensor section of
the Cisco DNA Spaces: IoT Services Configuration Guide.
Note
Connectors and Ports on the AP
The following figures show the available ports on the AP:
Cisco Catalyst Wireless 9166I Series Wi-Fi 6E Access Point Hardware Installation Guide
7
To Next Page
Loading...
Need help?
General
