Cisco Catalyst 9606R User Manual

Power Requirements 23
Cabling Requirements 23
Rack-Mounting Guidelines 24
Site Preparation Checklist 25
Installing the Switch 29
CHAPTER 3
Unpacking the Switch 29
Install the Switch as Shipped 30
Installing the Cable Guide on the Chassis with L-Brackets Preinstalled on the Chassis 30
Rack-Mounting the Chassis as Shipped 32
Install the Switch with Shelf Brackets 36
Installing the Shelf Kit L-Brackets 36
Installing the Shelf Brackets and the Crossbar 40
Installing the Cable Guide on the Chassis with Shelf Kit L-Bracket 42
Rack-Mounting the Chassis 43
Install the Switch in NEBS-Compliant Mode 50
NEBS-Compliant Air Filter 50
Rack-Mounting the Chassis in NEBS-Compliant Mode 50
Establishing System Ground 57
Attaching an ESD Strap 60
Verifying the Switch Chassis Installation 61
Installing the Fan Tray 63
CHAPTER 4
Guidelines for Removing and Installing a Fan Tray 63
Removing a Fan Tray 63
Information About Replacing a Fan Tray 64
Enabling the Service Mode Before Removing the Fan Tray 64
Removing the Fan Tray from the Front of the Chassis 65
Removing the Fan Tray from the Rear of the Chassis 67
Installing a Fan Tray 70
Installing the Fan Tray from the Front Panel of the Chassis 71
Installing the Fan Tray from the Rear of the Chassis 72
Verifying Fan Tray Installation 73
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
iii
Contents

Cisco Catalyst 9606R Specifications

General

Brand	Cisco
Model	Catalyst 9606R
Category	Switch
Language	English