4021196 Rev B 43
Configure Wireless Settings
Wireless > MAC Filter
The MAC Filter feature is used to either allow or block access to your wireless LAN
based on the MAC Address of the wireless client devices. The MAC Filter feature,
also known as an access list, can be used to help protect your wireless network from
access by unauthorized users.
Select the MAC Filter tab to open the Wireless MAC Filter page.
Wireless MAC Filter Page Description
Use the descriptions and instructions in the following table to configure the MAC
address filtering for the wireless network for your residential gateway. After you
make your selections, click Save Settings to apply your changes or Cancel Changes
to cancel.
MAC Filter
Allows you to Enable or Disable MAC Filtering for the residential
gateway
To Next Page
Loading...
Need help?
General