Initial Power On, Calibration, and Registration (AC
Power applied)
Writers: Duplicate this object and remove the original object from your book object.
Rename the topic description with the part number of your user guide.
The following chart illustrates the sequence of steps and the corresponding
appearance of the residential gateway front panel LED status indicators during
power up, calibration, and registration on the network when AC power is applied to
the residential gateway. Use this chart to troubleshoot the power up, calibration, and
registration process of your residential gateway.
Note: After the residential gateway completes Step 7 (Data Network Registration
Complete), the residential gateway proceeds immediately to Normal Operations. See
Normal Operations (AC Power applied) (on page 23).
Front Panel LED Status Indicators During Initial Power Up, Calibration, and
Registration