EX90 is delivered with:
• EX90 unit
• Touch screen with cable
• Handset base with cable
• Handset
• AC adapter and power
cable
• Screwdriver
• Cleaning cloth
Cables:
• DVI-D to DVI-I cable
(recommended for optimal
PC image quality)
• VGA to DVI-I cable
• Stereo audio cable 3.5 mm
• Ethernet cable
User documentation
The user documentation for this
product, including compliance and
safety information, is found on the
Cisco web site.
Go to: http://www.cisco.com/go/
telepresence/docs.
1
Unpacking the touch screen and cables
Lift out the rectangular box
from the package.
In the box you will find cables,
and another box with the
touch screen and handset.
Unpack the touch screen with
the handset and handset base.
Handset
Handset
base
Touch
screen
Cables
2
Unpacking the EX90 unit
Place the package on the floor with
broad side down.
Grasp the EX90, surrounded by
foam protection, and pull it out of
the package.
EX90
Carefully loosen the foam protection.
Lift out the EX90 and place it on a
firm surface.
Weight: 14 kg / 31 lb
78-19788-01 EX90 Installation Guide | December 2010 | © 2010 Cisco Systems, Inc. All rights reserved.
Cisco TelePresence System EX90
installation guide
To Next Page
Need help?
General
