Model GS7000 GainMaker Node
Forward Local Injection Module
Installation Instructions
Introduction
The Forward Local Injection (FLI) Module is a field installable accessory for the
Model GS7000 GainMaker
®
Scaleable 4-Port Node.
The FLI Module routes an RF signal from an external source to the Forward
Configuration Module (FCM) in the node through the Optical Interface Board
(OIB). This signal is then coupled with other inputs from one or more optical
receivers.
Note: The FLI Module Field Upgrade Kit, part number 4013575, contains the
parts necessary to add forward local injection functionality to your Model GS7000
Node.
To Next Page
Need help?
General
